Description
Highlights
- Provide 3 video streams for H.264 and MJPEG simultaneously
- Video stream up to 30 frames/sec at full D1 (720 x 480) resolution
- Video latency under 200 ms
- 2 Ethernet ports for cascade and Ethernet port redundancy
- Local storage capability with SD card slot
- -40 to 75°C operating temperature (optional)
- Free VPort SDK PLUS supported
Includes
- 1 x VPort 461 Series unit
- 1 x support CD/DVD
- 1 x installation guide
- 1 x warranty statement
- 1 x 6-pin terminal block for 1 power input and 2 digital inputs
- 1 x 8-pin terminal block for the other power input and 2 relay outputs
- 1 x 5-pin terminal block for the RS-232/422/RS-485 PTZ control port
- 1 x RJ45 to DB9 console port cable
Specs:
Video Compression
H.264 (MPEG4 part 10, AVC), MJPEG
Video Inputs
1, BNC connector
NTSC/PAL
Auto-sensing or manual
Video Stream
Maximum provide 3 video streams (2 Encoders, 1 Encoder for H.264, the other or H.264 and MJPEG)
Audio Input
1 line-in or mic-in with 3.5 mm phone jack
Audio Output
1 line out with 3.5 mm phone jack
Input Voltage
2 x 12 VDC or 24 VDC/VAC power inputs for redundancy
Overview:
The VPort 461 is a 1-channel industrial video encoder that uses the H.264 video compression algorithm, which provides the best video quality on the market while having a smaller bandwidth requirement than other video compression standards. In addition, the VPort 461 can provide up to 3 video streams simultaneously with H.264 and MJPEG compression. Video streams can be used for different purposes, such as viewing, recording, and analyzing. In addition, the rugged design and industrial certifications make the VPort 461 suitable for harsh environments.
Rugged Design for Mission-critical Industrial Environments
- -40 to 75°C wide operating temperature (optional)
- 2 Ethernet ports for cascade and port redundancy
- 1 RS-232/422/485 COM port for controlling external serial devices over Ethernet
- Redundant 12/24 VDC and 24 VAC power inputs for greater reliability
- Metal housing with IP30 protection against dust
- DIN-rail mounting installation for industrial environments
- UL508 (Pending) and Class I, Div. 2 (Pending) certified for hazardous locations
- Meets NEMA TS2, Section 2 requirements
Advanced Network Protocols Support Efficient Network Transmission and Integration
- Modbus/TCP for easy communication with SCADA software
- Standard RTSP (real-time streaming protocol) video streaming for easy integration
- Multicast (IGMP) protocols for efficient network transmission
- SNMPv1/v2c/v3 MIB-II for easy network management
- QoS (ToS) for configuring the transmission priority of video streams
- UPnP, DDNS, and IP filtering supported
- Two Ethernet Ports for Cascading and Port Redundancy
The VPort 461 has two built-in 10/100 Mbps Ethernet ports that allows cascading (daisy-chaining) of multiple VPort 461 units. This feautre can eliminate the need for fewer switch ports and reduce your cable layout effort. Port redundancy can be used to build a backup path for video transmission in case the primary path is broken.
SD Card for Storing Video Locally when the Network is Down
The VPort 461 is equipped with an SD card socket (V2.0) for local storage purposes. Enable local storage to record events that occur when the network is down and the video stream cannot be transmitted.
Transparent PTZ Control for Easy Control of PTZ Cameras
The VPort 461 uses Moxa’s Real COM technology to implement transparent communication for RS-232/422/485 PTZ control. The benefit of the Transparent PTZ Control function is that it eliminates the need to build the PTZ control driver into the VPort product, allowing the use of a legacy PTZ control panel or keyboard to control a PTZ camera directly.
Reviews
There are no reviews yet.