NPort 5210A-T 2-port RS-232 device server, -40 to 75°C operatin

Description

Includes

• 1 x NPort 5200A Series unit

• 1 x support CD/DVD

• 1 x installation guide

• 1 x warranty statement

• 1 x power adaptor (not included for -T models)

No. of Ports
1

Speed
10/100 Mbps, auto MDI/MDIX Connectors
8-pin RJ45 Magnetic Isolation Protection
1.5 KV built-in Ethernet Line Protection
Level 2 Surge, EN61000-4-5 Serial Standards
NPort® 5210A: RS-232
NPort® 5230A: RS-422/485
NPort® 5250A: RS-232/422/485 Number of Ports
2 Connectors
NPort 5210A/5250A: DB9 male
NPort 5230A: Terminal Block (5 pins per port) Serial Line Protection
15 KV ESD protection for all signals, Level 1 Surge, EN61000-4-5 RS-485 Data Direction Control
ADDC® (automatic data direction control) Pull High/Low Resistor for RS-485
1 KΩ, 150 KΩ Data Bits
5, 6, 7, 8 Stop Bits
1, 1.5, 2 Parity
None, Even, Odd, Space, Mark Flow Control
RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF Baudrate
50 bps to 921.6 Kbps

OVERVIEW

The NPort 5200A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort 5200A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.

A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort 5200A series becomes the lowest power consumption device server in the world. The NPort 5200A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort 5200A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serialto-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-step Web-based Configuration
The NPort 5200A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort 5200A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort settings and enable the application, saving a great amount of time and effort.

COM Port Grouping
The NPort 5200A’s COM Grouping function allows you to create a COM Group and redirect data from it to several physical COM ports on NPort device servers. With COM Grouping, you will be able to control multiple physical serial ports simultaneously by operating only one COM port.