Description
Includes
- 1 x ioLogik W5300
- 1 x 3-pin screw terminal block x 1 (for power input)
- 1 x 12-pin screw terminal block x 2 (for I/O)
- 1 x 5-pin screw terminal block x 1 (for RS-485)
- Document and Software CD
- Antenna
Specs:
Interface
GSM/GPRS/EDGE/UMTS/HSDPA
Band Options
Tri-band: UMTS/HSDPA 850/1900/2100 MHz
Quad-band: GSM/GPRS/EDGE 850/900/1800/1900 MHz
GPRS Multi-Slot Class
Class 10
GPRS Terminal Device Class
Class B
SMS
Point-to-Point Text/PDU
SIM Interface
3 V
Ethernet
1 x 10/100 Mbps, RJ45
Protection
1.5 KV magnetic isolation
Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, SNTP
Channels
4 analog inputs with differential input
Resolution
16 bits
I/O Mode
Voltage / Current
Input Range
0 to 10 V, ±10 V, ±5 V, 0 to 20 mA, 4 to 20 mA
Accuracy
• ±0.1% FSR @ 25°C
• ±0.3% FSR @ -10 and 55°C
Sampling Rate (all channels)
100 samples/sec
Input Impedence
200K ohms (min.)
Built-in Resistor for Current Input
102 ohms
Channels
8
I/O Mode
•DI or Event Counter (up to 900 Hz)
•DO or Pulse Output (up to 100 Hz)
Channels
Up to 8, source/sink selectable
Sensor Type
NPN/PNP type
I/O Mode
DI or Event Counter (up to 900 Hz)
Dry Contact
• Logic 0: short to GND
• Logic 1: open
Wet Contact
(For Source Type)
• Logic 0: 0 to 3 VDC
• Logic 1: 10 to 30 VDC
(For Sink Type)
• Logic 0: 10 to 30 VDC
• Logic 1: 0 to 3 VDC
Common Type
4 points per COM
Isolation
3K VDC or 2K Vrms
Counter/Frequency
900 Hz, power off storage
Digital Filtering Time Interval
Software selectable
Over-voltage Protection
36 VDC
Poweroff Counter Memory
Supports poweroff counter storage function
Relay On/Off Time
10 ms, 5 ms (max.)
Initial Insulation Resistance
1G min. @ 500 VDC
Expected Life
100,000 times (Typical)
Initial Contact Resistance
30 milli-ohms (max.)
Pulse Output
20 operation times per minutes at rated load
Power Input
24 VDC nominal, 12 to 36 VDC
Overview:
The ioLogik W5340-HSDPA micro controller is a rugged, compact solution for remote monitoring and alarm systems. With the ioLogik W5340-HSDPA, you can define a cellular connection strategy, including Always-On and Wake-On-Demand, to optimize data transmission rates for different applications. In addition, the operational cost of cellular communication depends on the data transmission rate. With Moxa’s active technology, you can expect to cut transmission costs in half and offer different cellular connection strategies to achieve better data transmission fees.
Reviews
There are no reviews yet.