ioLogik E2262 Active Ethernet I/O with 8 thermocouple inputs

ioLogik E2262 Active Ethernet I/O with 8 thermocouple inputs and 4 digital outputs

Highlights

Supports J, K, T, E, R, S, B, and N type thermocouple and
mV modes
Conversion Time: Less than 90 ms
Instant event messaging by TCP/UDP/email/SNMP-Trap
PC-based configuration utility and web console
Easy-to-use Click&Go Logic for local output control
Windows/WinCE VB/VC.NET and Linux C APIs
I/O control over Modbus/TCP and SNMP protocol
NIST traceable calibration

Description

Includes

1 x ioLogik E2200 Series unit
1 x support CD/DVD

Specs:

Ethernet
1 x 10/100 Mbps, RJ45

Protection
1.5 KV magnetic isolation

Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP

Interface
RS-485-2w Data+, Data-, GND

Serial Line Protection
15 KV ESD for all signals

Channels
8

Sensor Type
J, K, T, E, R, S, B, N type TC and mV mode

Conversion Time
Less than 90 ms

Effective Resolution
16 bits

Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C

Input Impedance
1 M ohm or better

Channels
4, sink type, 36 VDC, 200 mA

I/O Mode
DO or Pulse Output (up to 100 Hz)

Isolation
3K VDC or 2K Vrms

Overview:

Extend the Wiring Length The ioLogik E2262 can extend the wiring length of your sensors up to 10 fold. For example, whereas the wiring for a J-Type may normally extend only 10 m, the ioLogik E2262 can be used to increase the J-Type TC wiring length up to 100 m.

More Accurate Temperates The ioLogik E2262 has two cold junction compensation sets and supports digital filtering. Calibration, linearization, and calculation are based on the devices traced by the NIST (National Institute of Standards and Technology), and are stored in memory to eliminate this source of error. The ioLogik E2262 can also detect burnout and disconnection.