ioLogik E2260 Active Ethernet I/O with 6 RTD inputs and 4

ioLogik E2260 Active Ethernet I/O with 6 RTD inputs and 4 digital outputs

Highlights

  • Supports PT, JPT, Ni RTD s ensor types and resistors
  • Adjustable RTD sampling rate
  • Instant event messaging by TCP/UDP/email/SNMP-trap
  • PC-based configuration utility and web console
  • Easy-to-use Click&Go Logic for local output control
  • Windows/WinCE VB/VC.NET and Linux C APIs
  • I/O control over Modbus/TCP and SNMP protocol
  • NIST traceable calibration
Categories: , ,

Description

Includes

  • 1 x ioLogik E2200 Series unit
  • 1 x support CD/DVD

Specs:

Ethernet
1 x 10/100 Mbps, RJ45

Protection
1.5 KV magnetic isolation

Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP

Interface
RS-485-2w Data+, Data-, GND

Serial Line Protection
15 KV ESD for all signals

Channels
6

Input Type
Pt, JPt, Ni, RTD sensor, resistor

Sampling Rate
12 samples/sec (all channels)

Resolution
0.1°C or 0.1 ohm

Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C

Input Impedance
625K ohms (min.)

Channels
4, sink, 36 VDC, 200 mA

I/O Mode
DO or Pulse Output

Isolation
3K VDC or 2K Vrms

Overview:

Bring Intelligence to Temperature Measurement The ioLogik E2260 brings intelligence to temperature sensors. It comes equipped with virtual channels that are designed to calculate the average value of each channel and the difference between two channels. And it does all this without a controller or PC. Compatible with Popular RTD Temperature Sensors

The ioLogik E2260 offers PT100, PT1000, JPT, and Ni sensor types and a resistor of up to 2.2 kilo-ohms, and supports using your own resistance sensor, such as PTC or NTC types for your HVAC applications.

Reviews

There are no reviews yet.

Leave Comment
Be the first to review “ioLogik E2260 Active Ethernet I/O with 6 RTD inputs and 4”

Related products