Description
Includes
- 1 x ioLogik E2200 Series unit
- 1 x support CD/DVD
Specs:
Ethernet
1 x 10/100 Mbps, RJ45
Protection
1.5 KV magnetic isolation
Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP
Interface
RS-485-2w Data+, Data-, GND
Serial Line Protection
15 KV ESD for all signals
Channels
4 analog inputs with differential input
Resolution
16 bits
I/O Mode
Voltage / Current
Input Range
±150 mV, 0 to 150 mV, ±500 V, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA
Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
Sampling Rate (all channels)
100 samples/sec
Input Impedance
200K ohms (min.)
Built-in Resistor for Current Input
102 ohms
Channels
12
I/O Mode
DI or Event Counter (up to 900 Hz)
DO or Pulse Output (up to 100 Hz)
Channels
Up to 12, source/sink selectable
Sensor Type
NPN, PNP, and Dry contact
Dry Contact
Logic 0 short to GND; Logic 1 Open
Wet Contact
(For Source Type)
Logic 0 0 to 3 VDC; Logic 1 10 to 30 VDC
Channels
Up to 12, sink type, 36 VDC, 200 mA
I/O Mode
DO or Pulse Output (up to 100 Hz)
Isolation
2K Vrms or 3K VDC (Magnetic)
Overview:
Better I/O Matrix for Monitoring—Moxa’s ioLogik E2242 is tailormade for use with remote monitoring and alarm systems.
This Active Ethernet I/O product provides 4 analog inputs and 12 configu-rable DIOs for a 1:3 ratio of analog IOs to digital IOs perfectly adapted to water tank monitoring and environmental monitoring applications, in which 1 analog input is used to trigger 3 digital outputs as High-High, High, and Low alarms. Moxa’s ioLogik E2242 lets you set up our monitoring system without the need for a local PC or RTU.
Reviews
There are no reviews yet.