CP-602U-I w/o cable 2 CANbus ports, 2 KV isolation

CP-602U-I 2 CANbus ports, 2 KV isolation

Highlights

CAN 2.0A and CAN 2.0B supported
Two independent CAN communication ports
CAN transfer rate up to 1 Mbps
2 KV optical isolation protection
LED for transmit/receive status on each port
Optional 120 ohm terminal resistor for CAN bus network
DLL library and examples included
Windows driver provided

Description

Includes

1 x CP-602U-I Series unit
1 x support CD/DVD
1 x installation guide
1 x warranty statement

Specs:

Number of Ports:2
Card Interface:Universal PCI
CAN Controller:NXP SJA1000
CAN Specification:CAN 2.0 A/B
CAN Transceiver:PCA82C251
Signal Support:CAN_H, CAN_L, GND
Transfer Rate:1 Mbps
Max. Number of Boards per PC:4

Overview:

Moxa’s new CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (optional) and 2 KV isolation make the boards suitable for use in harsh industrial environments.