Automatic Backup Configurator ABC-01-M12

Features

RS-232/M12 console port connection
Store the complete configuration of one switch
Reduce system downtime, without an additional power input
Load the system configuration automatically after system reboot
Manually load and save the system configuration through the web console
Plug-n-Play system backup and restoration
Front label for writing identification information
Compact, rugged, reliable design
Supports Moxa’s ToughNet EN50155 managed Ethernet switches

Introduction

The ABC-01-M12 configuration backup and restoration tool is designed with M12 connector that can be used to save and load the configuration of Moxa’s ToughNet series EN50155 managed Ethernet switches through the switches’ RS-232 console port. This simple yet powerful tool makes it much easier to back up a switch’s system parameters, or even replace an existing switch with a new switch. With the ABC-01, you can quickly re-install a substitute switch (of the same model) or recover the entire system configuration, including IP address, if a switch failure occurs.

Description

• Basic Operation
Power Requirements	3 to 5 VDC (through the RS-232 port’s RTS signal)
Configuration	Use the web console of Moxa’s managed switches
Connectors	RS-232 M12 port
• Power Requirements
Power Input	3 to 5 VDC (through RS-232 RTS)
• Physical Characteristics
Enclosure	PVC molding, IP40 protection
Dimensions	32.5 x 97 x 12 mm (8.07 x 3.82 x 0.47 in)
Weight	ABC-01-M12: 60 g
On-Switch Installation	M4 screw (< 4 mm)
Cable Length	35 cm (including connector)
• Environmental Limits
Operating Temperature	0 to 60°C (32 to 140°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Ambient Relative Humidity	5 to 95 % (non-condensing)
• Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) Class A
EMS	EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3
• Warranty
Warranty Period	5 years